Zoomed in shot of engine
Home
/
Shop Our Products
/
Yokes
/
OEM Transmission Yokes

OEM Transmission Yokes

The transmission yoke is one of the most important match-up points in a driveline. It connects the driveshaft to the transmission output, and it has to fit the output shaft correctly while also matching the U-joint series being used on the driveshaft.

EDLS OEM transmission yokes include slip yokes and transmission yokes for common GM, Ford, and Mopar applications, with options across multiple series types and fitment details listed to support accurate match-up before ordering. 

Since 1981 • Ontario & Corona, CA • Nationwide shipping

Slip Yoke Fitment Depends on Output Shaft and Series Type 

A slip yoke slides onto the transmission output shaft and provides the connection point for the driveshaft’s front U-joint. Fitment is typically determined by transmission family and output details such as spline count or spline diameter, seal surface length, and overall length dimensions that control engagement and seal location. 

Series type matters too. This category includes common driveline series like 1310, 1330, and 1350, along with GM 3R and Mopar series types like 7260 and 7290. Some listings also include retention style details (such as inside clip or inside C-clip style), which should match the U-joint configuration being used. 

Common reasons people replace or upgrade a transmission yoke:

  • Replace a worn or damaged slip yoke to restore smooth driveline operation 
  • Match a driveshaft rebuild to the correct transmission output fitment 
  • Step up series strength (for example moving from 1310 to 1350) 
  • Correct a mismatch after a transmission swap 
  • Confirm seal surface, spline, and length details using the listing measurements    

OEM Transmission Yoke Products 

IEDLS OEM transmission yokes include fitment-specific slip yokes across popular GM, Ford, and Mopar transmission families. The lineup includes GM slip yokes for Powerglide, TH350, 700R4/4L60/4L60E, and TH400/4L80E outputs, with options across 1310, 1330, 1350, and 3R series. Ford options include C4, C6, AOD/4R70W, and select manual transmission fitments, with additional series choices and specific spline counts listed where applicable. Mopar offerings include 727 and 904 slip yokes with 7260, 7290, 1330, and 1350 series options, including listings that specify spline count and inside clip styles where required. 

Always match the listing’s Fits line to your transmission family and confirm output details like spline count and seal surface length when multiple variants exist. If a listing calls out a specific retention style (inside clip or inside C-clip), match that detail to your U-joint setup before ordering. 

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241) 

Price: $112.98

Part #: N2-4-4191

UPC: 00887753253033

Fits: NP203, NP205, NP208, NP241

32 spline | 1310

Category: Yokes → Transfer Case Yokes 

The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.

  • 32 spline 1310 transfer case yoke 
  • Hub diameter: 2.125 in 
  • Spline diameter: 1.400 in (32 spline) 
  • Through-hole: 2.00 in 
  • Strap style 
  • U-joint C/L to end of hub: 3.4385 in

Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)

SY-PG16-1310 – 1310 Transmission Slip Yoke for Early Cast Iron Powerglide & 3-Speed (16-Spline) 

Price: $190.83

Part #: SY-PG16-1310

Fits: Early cast iron Powerglide & 3-speed | 16 spline | 1310 series

Yokes → OEM Transmission Yokes 

The SY-PG16-1310 is a 16-spline slip yoke designed for early cast iron Powerglide and 3-speed applications. It’s sized for a 1310-series u-joint connection and includes seal measurements for matching. 

  • 1310 series transmission slip yoke 
  • Spline count: 16 
  • Spline diameter: 1.172 in 
  • Seal diameter: 1.50 in 

Compatible Applications: Early cast iron Powerglide and early 3-speed (16-spline) 

2-3-1331X – 1310 Transmission Slip Yoke for Cast Iron Powerglide / Early Warner T-10 (16-Spline) 

Price: $218.99

Part #: 2-3-1331X

UPC: 00887753251800

Fits: Cast iron Powerglide, early Warner T-10 | 16 spline | 1310 series

Yokes → OEM Transmission Yokes 

The 2-3-1331X is a 16-spline 1310-series transmission yoke intended for cast iron Powerglide and early Warner T-10 applications, with seal and overall length measurements included. 

  • 1310 series transmission slip yoke 
  • Spline count: 16 
  • Spline diameter: 1.172 in 
  • Seal surface length: 1.500 in 
  • U-joint C/L to end of spline: 4.875 in 

Compatible Applications: Cast iron Powerglide, early Warner T-10 (16-spline, 1310 series) 

SY-350-1310UB – Early Corvette Transmission Yoke (U-Bolt Style) 

Price: $131.88

Part #: SY-350-1310UB

UPC: 00887753251916

Fits: Early Corvette | U-bolt style

Category:  Yokes → OEM Transmission Yokes 

The SY-350-1310UB is a U-bolt style transmission yoke intended for early Corvette applications, with seal and spline measurements included for matching. 

  • U-bolt style transmission yoke 
  • Seal surface length: 1.500 in 
  • Spline diameter: 1.176 in 
  • U-joint C/L to end of spline: 4.875 in 

Compatible Applications: Early Corvette (U-bolt style)