Transfer Case Yokes
IEDLS transfer case yokes include fitment-specific options across common NP and Dana transfer case families, with multiple series and CV-style configurations listed so the driveline can be matched correctly for the application.
Fitment Depends on Transfer Case Model, Spline, and Joint Style
A transfer case yoke mounts to the transfer case output and provides the attachment point for the driveshaft. Fitment is typically determined by the transfer case model and output details such as spline count or spline diameter, along with the joint style being used on the driveshaft side.
This category includes multiple driveline series and configurations, including 1310 and 1330 CV-style yokes, a 1350 bolt-on style yoke for listed NP applications, strap-style and U-bolt style retention options, and Dana-specific OEM-quality yokes where the correct match is confirmed using the listing’s fitment and published dimensions.
Common reasons people replace or upgrade a transfer case yoke:
- Match the correct output spline and seal engagement for the transfer case
- Convert or support CV (double cardan) driveline configurations
- Step up series strength (1310 to 1330 or 1350 where applicable)
- Replace worn retention surfaces (strap style or U-bolt style)
- Address vibration or angle issues on lifted applications using a CV-style solution
Pickup Truck Center Support Bearing Products
IEDLS transfer case yokes include fitment-specific options for NP and Dana transfer case families. The lineup includes 1310-series transfer case yokes for NP203/NP205/NP208/NP241 outputs (including a 32-spline strap-style option and CV-style variants), a 1330 CV joint style yoke for listed NP applications, and a 1350 bolt-on style yoke for NP203/NP205/NP208/NP251. Dana offerings include OEM-quality yokes for Dana 20, Dana 231, and Dana 300 applications, including standard and CV-style configurations, plus U-bolt style options where listed.
Always match the listing’s Fits line to your transfer case model and confirm output spline details and joint style (standard, CV style, strap, or U-bolt) before ordering.
N2-4-4191 – 32 Spline 1310 Transfer Case Yoke (NP203 / NP205 / NP208 / NP241)
Price: $112.98
Part #: N2-4-4191
UPC: 00887753253033
Fits: NP203, NP205, NP208, NP241
32 spline | 1310
Category: Yokes → Transfer Case Yokes
The N2-4-4191 is a 32-spline transfer case yoke built for 1310-series driveline sizing on common NP transfer cases. Hub, spline, and through-hole measurements are provided for match-up by specification.
- 32 spline 1310 transfer case yoke
- Hub diameter: 2.125 in
- Spline diameter: 1.400 in (32 spline)
- Through-hole: 2.00 in
- Strap style
- U-joint C/L to end of hub: 3.4385 in
Compatible Applications: NP203, NP205, NP208, NP241 (32 spline, 1310 series)
3-4-6211-1 – Bolt-On Style 1350 Transfer Case Yoke (NP203 / NP205 / NP208 / NP251)
Price: $314.07
Part #: 3-4-6211-1
Fits: NP203, NP205, NP208, NP251 | 1350 | bolt-on style
Category: Yokes → Transfer Case Yokes Fits
The 3-4-6211-1 is a bolt-on style 1350 transfer case yoke for NP transfer case applications, designed around 1350-series driveline sizing.
- 1350 series bolt-on style transfer case yoke
- Listed fitment for NP203 / NP205 / NP208 / NP251
Compatible Applications: NP203, NP205, NP208, NP251
N2-4-5341 – 1310 CV Style Transfer Case Yoke (NP203 / NP205 / NP208 / NP241)
Price: $175.23
Part #: N2-4-5341
UPC: 00887753252494
Fits: NP203, NP205, NP208, NP241 | 1310 | CV style
Category: Yokes → Transfer Case Yokes Fits
The N2-4-5341 is a CV-style transfer case yoke built for 1310-series driveline sizing on NP transfer case applications. This part is designed for CV joint configurations, and seal replacement may be required during installation.
- 1310 series CV-style transfer case yoke
- Hub diameter: 1.875 in
- Spline diameter: 1.403 in (21 spline)
- Through-hole: 3.00 in
- CV style configuration
- Seal replacement may be required
Compatible Applications: NP203, NP205, NP208, NP241 (CV-style configuration)
2-4-5441 – 1330 CV Joint Style Transfer Case Yoke (NP203 / NP205 / NP208 / NP241)
Price: $296.60
Part #: 2-4-5441
Fits: NP203, NP205, NP208, NP241 | 1330 | CV joint style
Category: Yokes → Transfer Case Yokes Fits
The 2-4-5441 is a 1330-series transfer case yoke designed for CV joint style configurations on NP transfer case applications.
- 1330 series CV joint style transfer case yoke
- Listed fitment for NP203 / NP205 / NP208 / NP241
Compatible Applications: NP203, NP205, NP208, NP241 (CV joint style) P208, NP241 (CV-style configuration)
2-4-4061x – Dana 20 OEM Quality 1310 Transfer Case Yoke
Price: $219.21
Part #: 2-4-4061x
UPC: 00887753251831
Fits: Dana 20 | 1310 series
Category: Yokes → Transfer Case Yokes Fits
The 2-4-4061x is an OEM-quality transfer case yoke for Dana 20 applications, built around 1310-series driveline sizing with published hub, spline, and through-hole measurements.
- OEM-quality 1310 transfer case yoke
- Hub diameter: 1.552 in
- Spline diameter: 1.125 in (10 spline)
- Through-hole: 1.50 in
- Strap style
Compatible Applications: Dana 20 (1310 series)
2-4-8091x – Dana 300 1310 U-Bolt Style Transfer Case Yoke
Price: $72.00
Part #: 2-4-8091x
Fits: Dana 300 | 1310 | U-bolt style
Category: Yokes → Transfer Case Yokes Fits
The 2-4-8091x is a Dana 300 transfer case yoke designed for a 1310-series U-bolt style driveline connection.
- Dana 300 transfer case yoke
- 1310 series compatibility
- U-bolt style
Compatible Applications: Dana 300
2-4-6111x – Dana 231 / Dana 300 OEM Quality CV Style Transfer Case Yoke
Price: $88.7
Part #: 2-4-6111x
UPC: 00887753251848
Fits: Dana 231, Dana 300 | CV style
Category: Yokes → Transfer Case Yokes Fits
The 2-4-6111x is an OEM-quality CV-style transfer case yoke for Dana 231 and Dana 300 applications. Hub, spline, and through-hole measurements are included for match-up by specification.
- OEM-quality CV-style transfer case yoke
- Hub diameter: 1.552 in
- Spline diameter: 1.146 in (26 spline)
- Through-hole: 1.50 in
- CV style configuration
Compatible Applications: Dana 231, Dana 300 (CV-style configuration)
4137268 – 3R Constant Velocity Head (For 2″ x .120 Wall Tubing)
Price: $507.21
Part #: 4137268
Fits: 3R | constant velocity head | 2″ x .120 wall tubing
Category: Yokes → Transfer Case Yokes Fits
The 4137268 is a 3R constant velocity head component designed for use with 2-inch x .120 wall tubing.
- 3R constant velocity head
- Designed for 2″ x .120 wall tubing
Compatible Applications: Applications using 2″ x .120 wall tubing and a 3R CV head component
98 CV-FS – Front CV Driveshaft Solution for Lifted 1998–2004 GM Trucks (and Hummer H2)
Price: $558.51
Part #: 98 CV-FS
Fits: 1998–2004 Chevrolet & GMC trucks/SUVs (Tahoe, Yukon, Suburban) | Hummer H2 | front CV | 4″–8″ lift kits
Category: Yokes → Transfer Case Yokes Fits
The 98 CV-FS is a front CV driveshaft solution designed for lifted 1998–2004 GM trucks and SUVs, including the Hummer H2. It’s intended to address front driveline vibration in applications running lift kits in the 4-inch to 8-inch range.
- Front CV driveshaft solution for lifted GM applications
- Designed for 4″–8″ lift kits
- Intended to help reduce front driveline vibration
Compatible Applications: 1998–2004 Chevrolet & GMC trucks and SUVs (Tahoe, Yukon, Suburban)
Hummer H2
SK-31-20-CV – 2″ x .120 Wall 1310 CV Shaft (Chevrolet / Ford / GMC / Jeep)
Price: $432.48
Part #: SK-31-20-CV
Fits: Chevrolet, Ford, GMC, Jeep | 1310 CV shaft | 2″ x .120 wall tubing
Category: Yokes → Transfer Case Yokes Fits
The SK-31-20-CV is a 1310 CV shaft built from 2-inch x .120 wall tubing, listed for a range of common vehicle platforms.
- 1310 CV shaft
- Tubing: 2″ x .120 wall
Compatible Applications: Chevrolet, Ford, GMC, Jeep (1310 CV shaft applications)
JEEP JK F-F – 1310 CV Shaft Conversion (2007–2009 Jeep JK Wrangler Front)
Price: $674.92
Part #: JEEP JK F-F
Fits: 2007–2009 Jeep JK Wrangler (front) | 1310 CV shaft conversion
Category: Yokes → Transfer Case Yokes Fits
The JEEP JK F-F is a front driveshaft conversion designed for 2007–2009 Jeep JK Wrangler applications. It converts an OEM Rzeppa-style joint to a Spicer-style double cardan u-joint, intended to support longer travel and improve operating angle on lifted vehicles.
- Converts OEM Rzeppa-style joint to Spicer-style double cardan u-joint
- Designed for longer travel and improved operating angle
- Intended to help reduce vibration on lifted applications
Compatible Applications: 2007–2009 Jeep JK Wrangler (front)